hit counter script

Linking A Control Panel With The Menu; Entering And Displaying Text/Numbers - Sony XVS-G1 User Manual

Multi format switcher system
Hide thumbs Also See for XVS-G1:
Table of Contents

Advertisement

Linking a Control Panel
with the Menu
You can set a menu to operate by linking it with an
operation from a control panel.
Multiple web menu sessions can be connected
simultaneously, but only one web menu session can be
linked to an operation from a control panel.
The following control panel operations are link targets.
• Setting a parameter in the utility control block in menu
parameter operation mode
• Setting a parameter in the device control block in menu
parameter operation mode
• Recalling a menu by double-pressing a control panel
button
• Menu shortcut functions of the memory recall buttons in
the utility control block and the cross-point buttons in the
cross-point control block
Panel link button
1
Press the panel link button in the header area.
The connected control panel and the link icon are
displayed on the panel link button.
2
Check the message, then press [OK].
The control panel link is set and the link icon turns
light blue.
If a control panel link is set while the control panel is
linked to another menu session, the other menu link is
canceled.
To cancel a link
Press the panel link button, turning it off. The link is
canceled and the link icon turns gray.
Entering and Displaying
Text/Numbers
Press a numeric keypad input button to display the numeric
keypad window and enter a numeric value.
For details, see "Numeric Keypad Window" (page 33).
Press a keyboard input button and enter alphanumeric
characters using a computer keyboard/on-screen
keyboard/touch panel.
Invalid characters for names
The following characters cannot be used for entering
names.
\
/
:
*
?
Notes
• Characters that cannot be used are replaced with
underscores.
• When entering names shown on control panel buttons
and the display, "|" is used as a line break code.
Name settings when multiple items are
selected
When setting a name with multiple items selected, the
same name may be set or a consecutive number may be
appended to the name depending on the menu.
In the following menus, a consecutive number is appended
to the name.
• Home > Setup > System > Input > Input Adjust menu
(19101.31)
• Home > Setup > Xpt Assign > Src Name/Src Color >
Edit Src Name/Color menu (19102.51)
• Home > Setup > Panel > Module > Utility Function
Assign menu (19104.22)
Example:
Setting the source name of signals
If three signals are selected as the target and you enter
"CAM", the name of each signal will become "CAM1",
"CAM2", and "CAM3".
Timecode input and frame number input
When entering a timecode, you can select either timecode
input mode or frame number input mode.
Timecode input mode
Press [TC] in the numeric keypad window, turning it on, to
select timecode input mode.
43
"
<
>
|

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save PDF