Table of Contents
Advertisement
No.
Parameter
1
Red
2
Green
3
Blue
4
All
a) [Red] parameter value is shown.
To return primary color correction settings to the
defaults
Press the [Unity] button in the [Primary CCR] group,
check the message, then press [OK].
Setting RGB clip
1
Open the Home > Other Effects > Aux Bus > Aux Bus
CCR menu (18102.21).
2
Select the target AUX bus to set.
3
Set the [RGB Clip] button in the [RGB Clip] group to
the on state.
4
In the [RGB Clip Adjust] group, select an adjustment
item.
Dark: Dark clip adjustment
White: White clip adjustment
5
Set the following parameters.
No.
Parameter
1
Red
2
Green
3
Blue
4
All
a) [Red] parameter value is shown.
To return the RGB clip settings to the defaults
Press the [Unity] button in the [RGB Clip] group, check
the message, then press [OK].
Enabling a link group
When a link group is enabled, selecting a specific AUX
bus and setting the color corrector will apply the settings
of all the AUX buses in the same link group.
You can temporarily disable a link group to set individual
settings for AUX buses within the link group.
For details about setting a link group, see "Setting a Color
Corrector Link Group" (page 349).
Adjustment
R signal adjustment
G signal adjustment
B signal adjustment
Simultaneous adjustment of all
a)
RGB signals
Adjustment
R signal adjustment
G signal adjustment
B signal adjustment
Simultaneous adjustment of all
a)
RGB signals
Note
The enable/disable setting is applied to all link groups.
1
Open the Home > Other Effects > Aux Bus > Aux Bus
CCR menu (18102.21).
2
Set the [Link Enable] button in the [Aux Bus CCR
Link] group to the on state.
To disable a link group, set the [Link Enable] button to
the off state.
To apply the same settings to color correctors in
a group
If the settings of AUX bus color correctors within a group
are different, you can set the same settings by copying the
settings of a specific AUX bus.
Select an AUX bus and press the [Copy in Link Group]
button in the [Aux Bus CCR Link] group.
The color corrector of all AUX buses in the group are set
to the same settings as the selected AUX bus.
187
- Quick Links:
- Control Panel Configuration
Hide quick links:
Advertisement
Table of Contents
