Commissioning The Sm 331; Ai 8 X 16 Bits - Siemens SIMATIC S7-300 Reference Manual

Programmable logic controllers module data

Hide thumbs Also See for SIMATIC S7-300:

Table of Contents

Commissioning the SM 331; AI 8 x 16 bits

You set the mode of operation of the SM 331; AI 8 x 16 bits STEP 7.

You will find a description of the general procedure for assigning parameters to

analog modules in Section 4.7.

An overview of the parameters that you can set and their default settings are

shown in the table below.

Table 4-50 Parameters of the SM 331; AI 8 x 16 bits

Diagnostic interrupt

Hardware interrupt

upon limit violation

Trigger for hardware

Upper limit value

Lower limit value

Group diagnostics

With wire-break

Measuring Method

Measuring Range

Interference

Programmable Logic Controllers S7-300 Module Data

A5E00105505-03

Constraint possible due to measuring

32511 to –32512

–32512 to 32511

4DMU Current (4-wire transmitter)

Refer to Section 4.18.2 for the

measuring ranges of the input

channels that you can set.

400 Hz; 60 Hz; 50 Hz; 10 Hz

Analog Modules

Show Quick Links

Table of Contents