Siemens SIMATIC S7-300 Reference Manual page 373
Programmable logic controllers module data
Hide thumbs
Also See for SIMATIC S7-300:
- Manual (676 pages) ,
- Installation and operating manual (356 pages) ,
- Hardware and installation manual (256 pages)
Table of Contents
Advertisement
Assigning parameters to channels
You can configure each output channel of the SM 332; AO 8 x 12 bits individually.
You can thus assign separate parameters for each output channel.
When you set the parameters with SFCs in the user program, the parameters are
assigned to channel groups. Every output channel of the SM 332; AO 8 x 12 bits is
assigned to a channel group in this instance – in other words, for example output
channel 0 = channel group 0.
Note
If you modify output ranges when the analog output module SM 332; AO 8 x 12
bits is in operation, incorrect intermediate values may arise across the output.
Diagnostics
You will find the diagnostic messages that are grouped under the "group diagnosis"
parameter in Table 4-47, on page 4-73.
4.26.2
Output Ranges of the Analog Output Module SM 332;
AO 8 x 12 bits
Connecting the analog outputs
You can connect the outputs as voltage or current outputs, or disable them. You
perform connection of the outputs with the "output type" parameter in STEP 7.
Unused Channels
So that unused output channels of the SM 332; AO 8 x 12 bits remain
de-energized, you must set the "output type" parameter to "disabled" and leave the
terminal open.
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
Analog Modules
4-167
- Quick Links:
- Controllers S7
- Siplus S7-300 Modules
Hide quick links:
Advertisement
Table of Contents
