Commissioning The Sm 332; Ao 4 X 16 Bit - Siemens SIMATIC S7-300 Reference Manual
Programmable logic controllers module data
Hide thumbs
Also See for SIMATIC S7-300:
- Manual (676 pages) ,
- Installation and operating manual (356 pages) ,
- Hardware and installation manual (256 pages)
Table of Contents
Advertisement
Analog Modules
4.27.2
Commissioning the SM 332; AO 4 x 16 bit
Note
When switching on and off the rated load voltage (L+), wrong intermediate values
can occur across the output for approximately 10 ms.
Parameter
You will find a description of the general procedure for assigning parameters to
analog modules in the reference manual, section 4.7.
You will find an overview of the programmable parameters and their default values
in Table 4-42 in the reference manual.
Assigning parameters to channels
You can configure each output channel of the SM 332; AO 4 x 16 bits individually.
You can thus assign separate parameters for each output channel.
When you set the parameters with SFCs in the user program, the parameters are
assigned to channel groups. Every output channel of the SM 332; AO 4 x 16 bits is
assigned to a channel group in this instance – in other words, for example output
channel 0 = channel group 0.
Note
If you modify output ranges when the analog output module SM 332;
AO 4 x 16 bits is in operation, incorrect intermediate values may arise across the
output.
Diagnostics
You will find the diagnostic messages that are grouped under the "group diagnosis"
parameter in Table 4-47 in the reference manual.
4-174
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
- Quick Links:
- Controllers S7
- Siplus S7-300 Modules
Hide quick links:
Advertisement
Table of Contents
