Siemens SIMATIC S7-300 Reference Manual page 404
Programmable logic controllers module data
Hide thumbs
Also See for SIMATIC S7-300:
- Manual (676 pages) ,
- Installation and operating manual (356 pages) ,
- Hardware and installation manual (256 pages)
Table of Contents
Advertisement
Analog Modules
Commissioning the SM 334; AI 4/AO 2 x 12 bits
4.31.1
Note
Below the rated load voltage range, incorrect intermediate values occur at the
output when the rated load voltage supply (L+) is switched on/off.
STEP 7 V 4.0 tool for parameter assignment
The SM 334; AI 4/AO 2 x 12 bits is contained in the module catalog in STEP 7
V 4.0 or higher.
Parameter
You will find a description of the general procedure for assigning parameters to
analog modules in Section 4.7.
You will find an overview of the programmable parameters and their default values
in Table 4-43, on page 4-44.
4.31.2
Measuring/output method and measuring/output range of the
SM 334; AI 4/AO 2 x 12 bits
Connecting the inputs and outputs
You can connect the inputs as voltage, resistance or temperature measurement
inputs, or deactivate them.
You can connect the outputs as voltage, or disable them.
Perform connection of the inputs and outputs with the parameters "measuring
method" and "output method" in STEP 7.
Connection options for the input channels
You can connect the SM 334; AI 4/AO 2 x 12 bits in the following combinations:
Channel
Channels 0
and 1
Channels 2
and 3
4-198
•
2 x temperature or
•
2 x resistance
•
2 x voltage,
•
2 x resistance,
•
2 x temperature,
•
1 x temperature and 1 x voltage, or
•
1 x resistance and 1 x voltage
Wiring Versions
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
- Quick Links:
- Controllers S7
- Siplus S7-300 Modules
Hide quick links:
Advertisement
Table of Contents
