Siemens SIMATIC S7-300 Reference Manual page 555
Programmable logic controllers module data
Hide thumbs
Also See for SIMATIC S7-300:
- Manual (676 pages) ,
- Installation and operating manual (356 pages) ,
- Hardware and installation manual (256 pages)
Table of Contents
Advertisement
Optically isolated
With optically isolated input/output modules, the reference potentials of the con-
trol and load circuit are galvanically isolated; for example, by an optocoupler,
contact assembly or repeater. Input/output circuits can be connected to common
potential.
Organization block
Organization blocks (OBs) form the interface between the operating system of
the CPU and the user program. The order in which the user program is pro-
cessed is defined in the organization blocks.
Parameters
1. Tag of a → Logic block
2. Tag for setting the characteristics of a module (one or more per module).
When delivered to the customer, each module has a practical basic setting for its
parameters, which the user can modify in STEP 7.
Process image
The signal states of the digital input and output modules are stored in the CPU in
process image.
A distinction is made between the process-image of inputs and of outputs. The
process input image (PII) is read by the input modules before the operating sys-
tem scans the user program. The process output image (PIQ) is transferred to
the output modules at the end of program scanning.
Product status
Products having an identical order number are distinguished by their product sta-
tus. The product status is incremented for upwards compatible extensions, modi-
fications due to production reasons (use of new component parts and compo-
nents) and troubleshooting.
Programming device
→ Programming device
Programming device
A programming device (PG) is a personal computer in a specific industry-stan-
dard and compact design. A PG is completely equipped for programming
SIMATIC programmable logic controllers.
Reaction to open thermocouple
Parameter in STEP 7 for analog input modules when using Thermocouples. This
parameter defines whether "Overflow" (7FFF
output by the module in the event of an open thermocouple.
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
0) or "Underflow" (8000
0H
Glossary
0) is
0H
Glossary-7
- Quick Links:
- Controllers S7
- Siplus S7-300 Modules
Hide quick links:
Advertisement
Table of Contents
