Siemens S7-1200 System Manual page 479

Hide thumbs Also See for S7-1200:

Table of Contents

Parameters for the MC_WriteParam instruction

Parameter and type

Condition codes for ERRORID and ERRORINFO

[1] Error at MC_WriteParam

[2] Error at MC_Power

[3] Error at MC_Power and MC_MoveXXX or MC_CommandTable

S7-1200 Programmable controller

System Manual, 03/2014, A5E02486680-AG

Successful change of an Axis TO-DB parameter

Set an invalid parameter (Axis TO-DB parameter with incorrect length)

Set an invalid parameter (no Axis TO-DB parameter)

Set an Invalid parameter (read-only Axis TO-DB parameter)

Set a valid parameter, but axis is not disabled

Set a valid parameter (public read-only Axis TO-DB parameter) out-of-range

Set a valid parameter (public Axis TO-DB parameter) out-of-range

Name of parameter where value is written

Value to write to assigned parameter

Start the instruction. Default value: FALSE

Value has been written. Default value: FALSE

If TRUE, the instruction is operating. Default value: FALSE

If TRUE, an error occurred. Default value: FALSE

ID of the error

Related information to the ERRORID

Technology instructions

9.3 Motion control