Siemens S7-1200 System Manual page 785

Hide thumbs Also See for S7-1200:

Table of Contents

If the defect-mode restart fails, (for example, due to a hardware fault), the STOP and

ERROR LEDs are ON and the MAINT LED is OFF.

Operation in defect state cannot be guaranteed

Control devices can fail in an unsafe condition, resulting in unexpected operation of

controlled equipment. Such unexpected operations could result in death or serious injury to

personnel, and/or damage to equipment.

Use an emergency stop function, electromechanical overrides or other redundant

safeguards that are independent of the PLC.

Status LEDs on an SM

In addition, each digital SM provides a DIAG LED that indicates the status of the module:

● Green indicates that the module is operational

● Red indicates that the module is defective or non-operational

Each analog SM provides an I/O Channel LED for each of the analog inputs and outputs.

● Green indicates that the channel has been configured and is active

● Red indicates an error condition of the individual analog input or output

In addition, each analog SM provides a DIAG LED that indicates the status of the module:

● Green indicates that the module is operational

● Red indicates that the module is defective or non-operational

The SM detects the presence or absence of power to the module (field-side power, if

Status LEDs for a signal module (SM)

Field-side power is off

Not configured or update in progress

Module configured with no errors

Error condition

I/O error (with diagnostics enabled)

I/O error (with diagnostics disabled)

S7-1200 Programmable controller

System Manual, 03/2014, A5E02486680-AG

Online and diagnostic tools

(Red / Green)

Flashing red

Flashing green

Flashing red

14.1 Status LEDs

(Red / Green)

Flashing red

Flashing red