Show Fspf - Cisco MDS 9000 series Command Reference Manual

Hide thumbs Also See for MDS 9000 series:

Table of Contents

Show Commands

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show fspf

To display global FSPF information, use the show fspf command.

On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM

BladeCenter, the syntax differs as follows:

interface {bay port | ext port}

Syntax Description

vsan vsan-id

domain domain-id

fc slot/port

bay port | ext port

port-channel

Command Modes

Command History

Usage Guidelines

If no other parameters are given, all the LSRs in the database are displayed. If more specific information

is required, then the domain number of the owner of the LSR may be given. Detail gives more detailed

information on each LSR.

OL-8413-07, Cisco MDS SAN-OS Release 3.x

show fspf [database vsan vsan-id [detail | domain domain-id detail] | interface | vsan vsan-id

interface [fc slot/port | port-channel port-channel]]

Displays the FSPF link state database.

Specifies the VSAN ID. The range is 1 to 4093.

Displays detailed FSPF information.

Specifies the domain of the database. The range is 0 to 255.

Specifies the FSPF interface.

(Optional) Specifies the Fibre Channel interface to configure by slot and

port number on an MDS 9000 Family switch.

(Optional) Specifies the Fibre Channel interface by bay or by external port

on a Cisco Fabric Switch for HP c-Class BladeSystem or on a Cisco Fabric

Switch for IBM BladeCenter. The range is 0 to 48.

Specifies the port channel interface. The range is 1 to 256.

Modification

This command was introduced.

Cisco MDS 9000 Family Command Reference