Chapter 22
Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
The following example shows how to display transceiver information for a Fibre Channel interface.
switch# show interface fc2/5 transceiver
fc2/5 fcot is present
The following example shows how to display information about a Fibre Channel tunnel interface.
switch# show interface fc-tunnel 200
fc-tunnel 200 is up
Dest
Source IP Addr: 200.200.200.4
Explicit Path Name:
The following example shows how to display hardware port information for a Fibre Channel interface.
switch# show interface fc1/24 capabilities
Min Speed is 1 Gbps
Max Speed is 4 Gbps
FC-PH Version (high, low)
Receive data field size (max/min)
Transmit data field size (max/min)
Classes of Service supported are
Class 2 sequential delivery
Class 3 sequential delivery
Hold time (max/min)
BB state change notification
Maximum BB state change notifications
Rate Mode change
Rate Mode Capabilities
Receive BB Credit modification supported
FX mode Receive BB Credit (min/max/default)
ISL mode Receive BB Credit (min/max/default)
Performace buffer modification supported
Out of Service capable
Beacon mode configurable
The following example shows how to display information about a Fibre Channel interface on a Cisco
Fabric Switch for HP c-Class BladeSystem.
switch# show interface bay 11
bay11 is down (Externally Disabled)
OL-8413-07, Cisco MDS SAN-OS Release 3.x
5 minutes output rate 375002168 bits/sec, 46875271 bytes/sec, 33833 frames/sec
iSCSI statistics
6202235 packets input, 299732864 bytes
Command 6189718 pdus, Data-out 1937 pdus, 1983488 bytes, 0 fragments
146738794 packets output, 196613551108 bytes
Response 6184282 pdus (with sense 4), R2T 547 pdus
Data-in 140543388 pdus, 189570075420 bytes
name is CISCO-INFINEON
part number is V23848-M305-C56C
revision is A3
serial number is 30000474
fc-transmitter type is short wave laser
cisco extended id is unknown (0x0)
IP Addr: 200.200.200.7
Hardware is Fibre Channel
Port WWN is 20:0c:00:05:30:01:f9:f2
Admin port mode is auto, trunk mode is on
snmp link state traps are enabled
Port vsan is 1
Tunnel ID: 200
LSP ID: 1
(0,6)
(2112/256)
(2112/128)
Class 2, Class 3, Class F
supported
supported
(100/1) micro sec
supported
14
supported
Shared
(0/0/0)
yes
yes
Cisco MDS 9000 Family Command Reference
bytes
bytes
Dedicated
yes
yes
(1/60/16)
--
(2/60/16)
no
no
show interface
22-135