Cisco ASR 1013 Hardware Installation Manual page 181

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Cisco ASR 1006 Router Overview and Installation

DETAILED STEPS

Attach the front rack-mount brackets. Locate the threaded holes in the front sides of the chassis (first holes beyond the

vent holes) and use the package of black screws that shipped with the chassis.

Align the front rack-mount bracket to one side of the chassis.

Insert and tighten the screws on one side.

Repeat Step 2 through Step 3 on the other side of the chassis. Use at least 4 screws to secure the rack-mount brackets to

the chassis.

The cable-management brackets are installed on the chassis after you install the chassis rack-mount brackets.

Gather the two cable-management brackets and screws shipped with the chassis. The following image shows the

cable-management brackets attached on the front of the Cisco ASR 1006 Router when the chassis is placed on a table

top or equipment shelf.

Make certain that the cable-management 'U' feature device has the open end pointing upwards when you attach

it to the chassis.

Figure 39: Attaching the Cable-Management Brackets to the Cisco ASR 1006 Router

Cable-management screws

Cisco ASR 1000 Series Router Hardware Installation Guide

Equipment Shelf or Tabletop Installation

Chassis front rack-mount

Show Quick Links

Table of Contents

Troubleshooting