Management Ethernet Port Cable Connection - Cisco ASR 1013 Hardware Installation Manual

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Management Ethernet Port Cable Connection

After you establish normal router operation, you can disconnect the terminal.

What to Do Next

A connection will not be established when setting up an out-of-band connection or modem connection in

the auxiliary port and the console port.

Management Ethernet Port Cable Connection

To comply with Class A emissions requirements, a shielded Ethernet cable must be used for the connection.

To use the Management Ethernet interface on the router, perform the following steps:

SUMMARY STEPS

1. Insert an Ethernet RJ-45 cable into the MGMT ETHERNET port (see the following image. ).

2. Insert the other end of the RJ-45 cable to your management device or network.

DETAILED STEPS

Insert an Ethernet RJ-45 cable into the MGMT ETHERNET port (see the following image. ).

Figure 99: Cisco ASR 1002 Router Embedded ASR1000-RP1 Management Port Connector

Cisco ASR 1000 Series Router Hardware Installation Guide

CON—console port

Cisco ASR 1002 Router Overview and Installation

MGMT - management port and cable

AUX —auxiliary port

Show Quick Links

Table of Contents