Connecting Power To The Cisco Asr 1006 Router - Cisco ASR 1013 Hardware Installation Manual

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Cisco ASR 1006 Router Overview and Installation

Connecting Power to the Cisco ASR 1006 Router

The covers are an integral part of the safety design of the product. Do not operate the unit without the

covers installed. Statement 1077

When you install the unit, the ground connection must always be made first and disconnected last. Statement

Before performing any of the following procedures, ensure that power is removed from the DC circuit.

Statement 1003

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Statement 1030

This section describes the procedure to connect AC input and DC input power to your Cisco ASR 1006 Router.

The DC power supply for the Cisco ASR 1006, ASR 1004, ASR 1002, and ASR 1013 routers operate at

individual specifications. The following table shows the common input ranges and circuit breaker requirements.

Table 48: Cisco ASR 1000 Series Router DC Power Supply System Input Requirements

Cisco ASR 1000

System Input Rating

Series Router DC

Power Supply

Cisco ASR 1006

Cisco ASR 1004

Cisco ASR 1002

Cisco ASR 1013

Circuit Breaker

Always AWG #6

Always AWG #6

Cisco ASR 1000 Series Router Hardware Installation Guide

Show Quick Links

Table of Contents