Cisco ASR 1013 Hardware Installation Manual page 389

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Installation manual (42 pages)

Quick start manual (37 pages)

Replacing (120 pages)

Table of Contents

Cisco ASR 1002-X Router Overview and Installation

Table 78: Cisco ASR 1002-X Router –48 VDC Power Supply LEDs , on page 355

Cisco ASR 1002-X Router –48 VDC power supply.

Table 78: Cisco ASR 1002-X Router – 48 VDC Power Supply LEDs

A bi-color LED indicates the

presence of input voltage

A bi-color LED indicates power

supply fan status

Power supply activity

Connecting the –48 VDC Input Power to the Cisco ASR 1002-X Router

Cisco ASR 1000 Series Router Hardware Installation Guide

describes the LEDs on the

LED turns green to signal that

the –48 VDC power supply

input voltage is greater than

43.5VDC at start and remains

green down to 39VDC.

The LED turns amber if the

power supply turns off due to

low input voltage (falls below

39VDC) and indicates that there

is still a hazard present (voltage

on the terminal block). The

LED remains amber and is

active till around 20 V +/-5 V.

The LED is not illuminated if

the input is below 15 V.

The LED turns s green when all

the fans are operational.

The LED turns red when a fan

failure is detected.

When the LED is off, it signals

that the –48 VDC output

voltage is within the normal

operating range. Output voltage

between the minimum and

maximum limits will not create

an output fail alarm, and output

voltages below the minimum or

above the maximum will create

an output fail alarm.

The Led turns red to indicate

that the –48 VDC output is out

of the specified range.

When you turn the power

supply on, the LED turns red

for 2 to 3 seconds to test the

LED operation before going off.

Show Quick Links

Quick Links:
Cisco Asr 1000 Series Routers Hardware...

Table of Contents

Troubleshooting

Cisco ASR 1013 Hardware Installation Manual page 389

Hide quick links:

Troubleshooting

Related Manuals for Cisco ASR 1013

Related Products for Cisco ASR 1013

This manual is also suitable for:

Table of Contents