Cisco ASR 1013 Hardware Installation Manual page 562

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Removing and Replacing Cisco ASR 1000 Series Router 1 GB USB Flash Token Memory Stick

Do not remove a USB Flash memory module when issuing some file access command or a read/write

operation to the Flash memory module when it is processing. The router might reload or the USB Flash

memory module can be damaged. You can check to see if the USB activity LED on the Cisco ASR1000-RP

front panel is flashing, prior to the removal of the USB device

To remove and then replace a USB 1 GB flash token memory stick from a Cisco ASR1000-RP, follow these

SUMMARY STEPS

1. Pull the memory stick from the USB port.

2. To replace a Cisco USB Flash memory stick, simply insert the module into the USB port 0 or 1 port as

shown in the following figure. The Flash memory module can be inserted only in one way, and can be

inserted or removed regardless of whether the router is powered up or not.

DETAILED STEPS

Pull the memory stick from the USB port.

The Cisco ASR 1002 Router has only one USB

To replace a Cisco USB Flash memory stick, simply insert the module into the USB port 0 or 1 port as shown in the

following figure. The Flash memory module can be inserted only in one way, and can be inserted or removed regardless

of whether the router is powered up or not.

Cisco ASR 1000 Series Router Hardware Installation Guide

Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers

Internal hard drive LED

External USB Flash LED

Internal USB bootflash

USB0 and USB1

Cisco ASR 1000 Series

Show Quick Links

Table of Contents

Troubleshooting