Cisco Asr 1000 Series Router Hardware Installation Guide - Cisco ASR 1013 Hardware Installation Manual

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Installation manual (42 pages)

Quick start manual (37 pages)

Replacing (120 pages)

Table of Contents

Cisco Integrated ASR1000-RP1 for Cisco ASR 1002 Router

The following figure shows the Cisco ASR1000-RP1 LEDs for the Cisco ASR 1002 Router.

Figure 10: Embedded Cisco ASR1000-RP1 LEDs

The embedded route processors for the Cisco ASR 1002 Router provides connection for one SPA bay and

the circuitry for the a built-in 4xGE SPA.

The Cisco route processor for ASR 1002 Router meets the requirements of route processors for the Cisco

ASR 1006 and the Cisco ASR 1004 routers; except for the following deviations:

• No SATA hard drive supported. Bulk file storage is on a large fixed eUSB device (up to 8 GB (bytes)

• No support for redundant route processors.

• Hardware memory and storage options (such as DRAM) are not field upgradeable.

• Network clock changes. No second BITS clock input supported.

• The LED order is from top to bottom on the route processor is MIN, MAJ, CRIT.

• The Cisco ASR1000-RP2 is not supported on the Cisco ASR 1002 router or Cisco ASR 1002-F router

The following table lists the Cisco embedded ASR1000-RP1 LEDs and behaviors.

Table 12: Cisco Embedded ASR1000-RP1 LEDs in the Cisco ASR 1002 Router