Cisco Asr 1013 Router Power Zones - Cisco ASR 1013 Hardware Installation Manual

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Cisco ASR 1013 Router Power Zones

Internal fans draw cooling air into the chassis and across internal components to maintain an acceptable

operating temperature. (See the preceding figure.) The fans are built into the power supply allowing fan and

power supply replacement. A two-hole grounding lug is located on the bottom rear of the chassis (see the

preceding figure, callout 6). Four power supplies, either AC power supplies or DC power supplies, are accessed

from the rear of the router. The power supply bays are numbered from bottom to top: 0, 1, 2, and 3 respectively.

The Cisco ASR 1013 Router has two power zones:

• Power zone 1(top half of chassis) includes slots:

• Power zone 0 (bottom half of chassis) includes slots:

Do not combine AC and DC power supplies in the same chassis.

Cisco ASR 1013 Router supports only Cisco ASR1000-RP2.

Cisco ASR 1000 Series Router Hardware Installation Guide

Forward rack-mount ears

are shipped installed

Chassis handle

Rear rack-mount brackets

AC power supply in slot

3 (power supply zone 1)

◦ Carrier card slots 3, 4, and 5

◦ Carrier card slots 0, 1, and 2

Cisco ASR 1013 Router Overview and Installation

AC power supply in slot

1 (power supply zone 0)

AC power supply in slot

0 (power supply zone 0)

Chassis ground stud

Show Quick Links

Table of Contents