Cisco ASR 1013 Hardware Installation Manual page 136
Asr 1000 series
Hide thumbs
Also See for ASR 1013:
- Installation manual (42 pages) ,
- Quick start manual (37 pages) ,
- Replacing (120 pages)
Table of Contents
Advertisement
Cisco ASR 1000 Series SPA Interface Processor
• Cisco ASR 1000-SIP40—This SIP supports:
For information about what hardware is supported and compatible and not compatible with the new ASR
1000 40G components and Cisco ASR 1013 Router, see
The Cisco SPAs provide the physical interfaces for router connectivity ranging from copper, channelized,
POS, ATM and Ethernet. The Cisco ASR 1000 Series SIP provides the physical termination for the SPAs
and accepts up to four half-height and 2 full height Cisco SPAs.
The is a list of characteristics of the Cisco ASR 1000 Series SPA Interface Processors for the Cisco ASR
1006, Cisco ASR 1004, and Cisco ASR 1013 routers:
• A SIP is a carrier card that inserts into a router slot like a line card. It provides no network connectivity
on its own.
• A SIP contains one or more subslots, which are used to house one or more SPAs. The SPA provides
interface ports for network connectivity.
• During normal operation, the SIP should reside in the router fully populated either with functional SPAs
in all subslots, or with a blank filler plate (SPA-BLANK=) inserted in all empty subslots.
• SIPs support online insertion and removal (OIR) with SPAs inserted in their subslots. SPAs also support
OIR and can be inserted or removed independently from the SIP.
Fully populate all slots and subslots with blank filler plates or functional SPAs for maximum efficiency
Note
of the cooling system.
This section describes the Cisco ASR 1000 Series SPA Interface (SIP) components and subslot
identification.Figure 4-1
1
2
Cisco ASR 1000 Series Router Hardware Installation Guide
102
◦ 4 half height (¼ Rate or full rate or combination) SPAs with up to 24 ports per SPA
◦ 2 full height (¼ Rate or full rate or combination) SPAs with up to 48 ports per SPA
◦ 2 half height and 1 full height combination that does not exceed 96 ports
◦ Up to 40 Gbps aggregate bandwidth from the four SPA bays
◦ ESI bandwidth of 11 to 46 Gbps
◦ Ingress buffering at 128 MB and egress buffering at 6MB
shows an example of the Cisco ASR 1000 Series SPA Interface (SIP) module.
SPA subslot 0
SPA subslot 1
Cisco ASR 1000 Series Router SPA Interface Processors (SIPs)
Table 2-4
and
Table 2-3
.
4
STATUS Led
5
PWR Led
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Cisco ASR 1013
Related Products for Cisco ASR 1013
- Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router
- Cisco ASR1000-RP2 - ASR 1000 Series Route Processor 2 Router
- Cisco ASR1002-5G-SEC/K9 - ASR 1002 VPN+FW Bundle Router
- Cisco ASR1002-5G-SHA/K9 - ASR 1002 Sec+HA Bundle Router
- Cisco ASR1004-10G-SHA/K9 - ASR 1004 Sec+HA Bundle Router
- Cisco ASR1004-20G-SEC/K9 - ASR 1004 VPN+FW Bundle Router
- Cisco ASR1006-10G-SEC/K9 - ASR 1006 VPN+FW Bundle Router
- Cisco ASR1006-10G-VPN/K9 - ASR 1006 VPN Bundle Router