Chassis Rear Rack-Mount Brackets - Cisco ASR 1013 Hardware Installation Manual

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Cisco ASR 1004 Router Overview and Installation

The following shows where to attach the front rack-mount brackets to the Cisco ASR 1004 Router.

Figure 65: Attaching the Front Rack-Mount Brackets to the Cisco ASR 1004 Router

Position the front rack-mount bracket top hole with the chassis first top hole behind the side vent holes.

Insert and tighten the black screws on one side.

Repeat Step 1 through Step 3 on the other side of the chassis. Use black screws to secure the rack-mount brackets to the

Install the chassis in a rack. To install the Cisco ASR 1004 Router in a rack, go to the

Router in a Rack, on page

What to Do Next

This completes the steps for attaching the front rack-mount brackets to the Cisco ASR 1004 Router.

Chassis Rear Rack-Mount Brackets

If you are rack-mounting the chassis using the rear rack-mount brackets, then this type of installation provides

for the chassis being recessed in the rack.

To install the front rack-mount brackets on the Cisco ASR 1004 Router, perform the following steps:

Front rack-mount bracket

Chassis Rear Rack-Mount Brackets

Installing the Cisco ASR 1004

Cisco ASR 1000 Series Router Hardware Installation Guide

Chassis side vent holes

Front rack-mount bracket

and ear holes

Show Quick Links

Table of Contents