Cisco ASR 1013 Hardware Installation Manual page 228

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Chassis Rear Rack-Mount Brackets

SUMMARY STEPS

1. Locate the threaded holes on the rear side of the chassis. Make certain that you hold the rear rack-mount

bracket with the ear and holes facing outward and towards the rear of the chassis.

2. Position the rear rack-mount bracket top hole with the chassis second top hole from the back (see

66: Attaching the Rear Rack-Mount Brackets to the Cisco ASR 1004 Router, on page

3. Insert and tighten the five screws on one side.

4. After the bracket is secured to the side of the chassis, slide the two remaining components into the side

rack-mount bracket.

5. Repeat Step 1 through Step 3 on the other side of the chassis. Use five screws to secure the rear rack-mount

brackets to the chassis.

DETAILED STEPS

Locate the threaded holes on the rear side of the chassis. Make certain that you hold the rear rack-mount bracket with

the ear and holes facing outward and towards the rear of the chassis.

The following image shows where to attach the rear rack-mount brackets to the Cisco ASR 1004 Router.

Figure 66: Attaching the Rear Rack-Mount Brackets to the Cisco ASR 1004 Router

Cisco ASR 1000 Series Router Hardware Installation Guide

Rear rack-mount bracket ear

Rear rack-mount bracket

(first bracket to attach to

Cisco ASR 1004 Router Overview and Installation

Rear rack-mount bracket

components that slide into

rear bracket that is attached

to the chassis

Rear rack-mount bracket

Show Quick Links

Table of Contents

Troubleshooting