Four-Post Rack Installation - Cisco ASR 1013 Hardware Installation Manual

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Cisco ASR 1002 Router Overview and Installation

The following image shows where to attach the rear rack-mount brackets to the Cisco ASR 1002 Router.

Figure 92: Attaching the Rear Rack-Mount Brackets to the Cisco ASR 1002 Router

Slide the chassis into the rack, pushing it back until the brackets meet the mounting strips or posts on both sides of the

Keeping the brackets flush against the posts or mounting strips, align the holes in the brackets with the holes on the rack

or mounting strip.

For each bracket, insert and tighten two screws to the rack on both sides.

This completes the procedure for installing the chassis on a two-post rack. Proceed to the

Connection, on page 249

Four-Post Rack Installation

The Cisco ASR 1002 Router can be flush-mounted in a 19-inch equipment rack using the rack-mounting kit

provided with your system. The Cisco ASR 1002 Router can be mounted into the rack using two recommended

• Installing the chassis in an existing rack with equipment.

• Installing an empty chassis in a rack with no equipment installed.

Rack equipment rail

to continue the installation.

Cisco ASR 1000 Series Router Hardware Installation Guide

Four-Post Rack Installation

Rack-mount bracket ear and

Attaching a Chassis Ground

Show Quick Links

Table of Contents