Chassis Rear Rack-Mount Brackets - Cisco ASR 1013 Hardware Installation Manual

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Chassis Rear Rack-Mount Brackets

The following image shows where to attach the front rack-mount brackets to the Cisco ASR 1002-F Router. Depending

on the bracket holes you use, the chassis may protrude in the rack.

Figure 127: Attaching the Front Rack-Mount Brackets to the Cisco ASR 1002-F Router

Position the front rack-mount bracket top hole with the chassis first top hole behind the side vent holes.

Insert and tighten the black screws on one side.

Repeat Step 1 through Step 3 on the other side of the chassis. Use the black screws to secure the rack-mount brackets to

the chassis.

Install the chassis in a rack. To install the Cisco ASR 1002-F Router in a rack, go to the

What to Do Next

This completes the steps for attaching the front rack-mount brackets to the Cisco ASR 1002-F Router.

Chassis Rear Rack-Mount Brackets

If you are rack-mounting the chassis using the rear rack-mount brackets, then this type of installation provides

for the chassis being recessed in the rack.

To install the rear rack-mount brackets on the Cisco ASR 1002-F Router, perform the following steps:

Cisco ASR 1000 Series Router Hardware Installation Guide

Front rack-mount bracket ear

Front rack-mount bracket

Cisco ASR 1002-F Router Overview and Installation

Installing the Cisco ASR 1002-F

Front rack-mount bracket

Show Quick Links

Table of Contents