Installing Dc Input Power On The Cisco Asr 1001 Router - Cisco ASR 1013 Hardware Installation Manual

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Cisco ASR 1001 Router Overview and Installation

After the power supply fasteners are loosened, grasp the handle with one hand, support the weight of the power supply

with the other hand, and pull the power supply out of the slot. The following image shows how to remove the Cisco ASR

1001 Router AC power supply cables.

Figure 219: Removing the Cisco ASR 1001 Router AC Power Supply Cables

Repeat these steps to remove the AC power supply from Slot PS0.

What to Do Next

This completes the procedure of removing the AC power supply from the Cisco ASR 1001 Router.

Installing DC Input Power on the Cisco ASR 1001 Router

The Cisco ASR 1001 Router DC input connector is compatible with a pluggable Euro-style plug. The input

connector and plug must be UL recognized under UL 486 for field wiring. The connection polarity shall be

from left to right: negative (–), positive (+), and ground. See "Cisco ASR 1001 Router AC Power Supply and

DC Power Supply" figure in the Cisco ASR 1001 Router Power Supply Installation section.

Installing DC Input Power on the Cisco ASR 1001 Router

Cisco ASR 1000 Series Router Hardware Installation Guide

Show Quick Links

Table of Contents