Ac And Dc System Power Ratings; Power Supplies For The Cisco Asr 1006 Router - Cisco ASR 1013 Hardware Installation Manual
Asr 1000 series
Hide thumbs
Also See for ASR 1013:
- Installation manual (42 pages) ,
- Quick start manual (37 pages) ,
- Replacing (120 pages)
Table of Contents
Advertisement
Cisco ASR 1000 Series Routers Component Overview
Switch Type Supported
Standby switch
AC and DC System Power Ratings
The following table lists AC and DC power supply system rating requirements for all Cisco ASR 1000 Series
Routers.
Table 16: AC and DC Power Supply System Rating Specifications for the Cisco ASR 1000 Series Routers
Description
Power supply declared ratings
Nominal line frequency rating
Power Supplies for the Cisco ASR 1006 Router
The information in this section applies to the ASR1006-PWR-DC and ASR1006-PWR-AC power supplies.
Note
The Cisco ASR 1006 Router also supports the ASR1013/06-PWR-DC and ASR1013/06-PWR-AC power
supplies, which are described in the
The Cisco ASR 1006 Router can support up to 1200 W output (AC and –48 VDC input). The 1200 W power
supply module consists of either an AC or –48 VDC input and 1200 watt output closed frame power supply
with two DC voltage outputs: 12 V and 3.3 V.
Each power supply module contains three internal fan modules and provides the forced air cooling for the
chassis. These power supply modules contain a monitor circuit to determine the status of fan speed and
operation along with LED status indicating fan errors.
Symbol
A broken circle with a vertical line
through the top of it
Specification
AC = 100-240 VAC
DC = –48/ –60 VDC
+24 VDC = +21 / +36 VDC
50/60 Hz for AC power supplies
Power Supplies for the Cisco ASR 1013 Router, on page
Cisco ASR 1000 Series Router Hardware Installation Guide
AC and DC System Power Ratings
Cisco ASR 1000 Series Router
Power Supply
ASR 1006 AC
ASR 1004 AC
ASR 1002 –48 VDC
ASR 1002 +24 VDC
ASR 1013 AC and DC
ASR 1001 AC and DC
ASR 1002-X –48 VDC
ASR 1002-X +24 VDC
76.
51
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
