Table of Contents
Advertisement
3.3
Function List
(1) Cyclic transmission
Function
Communications
using RX and RY
Communications
with other
Communications
stations
using RWr and
RWw
Link refresh
Access to
devices and link
devices
Direct access to
link devices
Interlink transmission
Mode selection for cyclic
transmission
Assurance of cyclic data integrity
Scan synchronization specification
Input status setting for data link
faulty station
Output status setting for CPU STOP
Output status setting for CPU stop
error
Cyclic transmission stop and restart
36
Description
The master station communicates I/O data in
units of bits with other stations.
The master station communicates I/O data in
units of words with other stations.
Transfer between the link device of the master/
local module and the device of the CPU module
is performed automatically.
The program accesses the link devices of the
master/local module directly.
A relay station transfers the link devices of the
master station and submaster station to another
network module.
This mode is selected for optimizing the
performance of cyclic transmission based on the
cyclic transmission and transient transmission
frequency.
The mode can be selected from "Online (Normal
Mode)" and "Online (High Speed Mode)".
The cyclic data integrity is assured in units of 32
bits or station-based units.
Link scan is set to asynchronous or
synchronous with the sequence scan of the
CPU module.
Whether input data from another station where a
data link error occurs is cleared or held is
selected.
When the CPU module mounted with a master/
local module is set to STOP, whether cyclic data
output is held or cleared can be selected.
When a stop error occurs in the CPU module
where a master/local module is mounted,
whether cyclic transmission output is held or
cleared can be selected.
During debugging and other operations, cyclic
transmission is stopped. (Data reception from a
slave station and data sending from the own
station are stopped.) Also, the stopped cyclic
transmission is restarted.
Transient transmission does not stop.
:Available, ×: Not available
Availability
Master
station,
Local
submaster
station
station
Page 88, Section 7.3
Page 124, Section
8.1.1
Page 103, Section 7.5
Page 127, Section
8.1.2
Page 129, Section
8.1.3
Page 113, Section 7.7
×
Page 133, Section
8.1.4
Page 84, Section 7.2
×
(1)
Page 529, Appendix 6
Page 134, Section
8.1.5
Page 139, Section
×
8.1.6
Page 140, Section
8.1.7
Page 142, Section
8.1.8
Page 140, Section
8.1.7
Page 143, Section
8.1.9
Page 221, Section 9.4
Reference
Advertisement
Table of Contents
Troubleshooting
