Table of Contents
Advertisement
(e) Checking the status of communications
After the setting is completed in each module, execute the IP communication test using the configuration tool of
the Ethernet adapter module. Then check for an error in the communication route between the Ethernet device
(request source device) and Ethernet device (request destination device).
[Online]
[Diagnostics]
For the IP communication test using the configuration tool, refer to the following.
CC-Link IE Field Network Ethernet Adapter Module User's Manual
• When the IP communication test is normally completed
The following window appears.
• When the IP communication test ends abnormally
If IP communications cannot be performed due to a timeout error or other reasons, refer to
"Communications cannot be performed using the IP packet transfer function" in the manual for the
Ethernet adapter module and take corrective actions.
CHAPTER 8 FUNCTIONS
button
8
171
Advertisement
Table of Contents
Troubleshooting
