Cisco Asr 1002-X Router Slot Numbering - Cisco ASR 1013 Hardware Installation Manual

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Cisco ASR 1002-X Router Overview and Installation

Internal fans draw cooling air into the chassis and across internal components to maintain an acceptable

operating temperature. The fans are located at the rear of the chassis. A two-hole grounding lug is located on

the side of the chassis. Two power supplies, either two AC power supplies or two DC power supplies, can be

accessed from the rear of the router.

Use only the AC power supplies or the DC power supplies in the Cisco ASR 1002-X Router. Do not mix

power supply types.

Cisco ASR 1002-X Router Slot Numbering

The Cisco ASR 1002-X Router contains an integrated SIP that supports three half-height SPAs or one

half-height SPA and one full-height SPA. The SPA bays are Bay 1, Bay 2, and Bay 3. The router provides a

built-in 6 Gigabit Ethernet interface, and this SPA is physically located on the integrated route processor

board. The built-in 6xGE SPA ports are located in the SPA Bay 0 and addressed as GE 0/0/x.

The following image shows the Cisco ASR 1002-X Router slot numbering.

Figure 147: Cisco ASR 1002-X Router Slot Numbering

DC power supply slot 0

DC power supply switch

Standby/On (|)

DC power supply LEDs

Power supply fan

Built-in 6x1GE SPA in

Cisco ASR 1000 Series Router Hardware Installation Guide

Rear View of the Cisco ASR 1002-X Router

DC power supply slot 1

Positive lead

Negative lead

Show Quick Links

Table of Contents