Interpolator
Logic unit of the → NCK that defines intermediate values for the motions to be carried out in
individual axes based on information on the end positions specified in the part program.
Interpolatory compensation
Mechanical deviations of the machine are compensated for by means of interpolatory
compensation functions, such as → leadscrew error, sag, angularity, and temperature
compensation.
Interrupt routine
Interrupt routines are special → subprograms that can be started by events (external signals)
in the machining process. A part program block which is currently being worked through is
interrupted and the position of the axes at the point of interruption is automatically saved.
Inverse-time feedrate
The time required for the path of a block to be traversed can also be programmed for the axis
motion instead of the feed velocity (G93).
JOG
Control operating mode (setup mode): In JOG mode, the machine can be set up. Individual
axes and spindles can be traversed in JOG mode by means of the direction keys. Additional
functions in JOG mode include: → Reference point approach, → Repos, and → Preset (set
actual value).
Key switch
The key switch on the → machine control panel has four positions that are assigned functions
by the operating system of the controller. The key switch has three different colored keys that
can be removed in the specified positions.
Keywords
Words with specified notation that have a defined meaning in the programming language for
→ part programs.
KÜ
Transformation ratio
KV
Servo gain factor, a control variable in a control loop.
Basic Functions
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Glossary
1689