hit counter script

Siemens SINUMERIK 840D sl Function Manual page 1606

Hide thumbs Also See for SINUMERIK 840D sl:
Table of Contents

Advertisement

Z1: NC/PLC interface signals
19.6 Mode group, channel, program operation, reset response (K1)
DB11
DBX4.2
Selected JOG mode
Data block
Signal(s) from BAG (HMI → PLC)
Edge evaluation: No
Signal state 1 or
JOG mode is selected by HMI.
edge change
0 → 1
Signal state 0 or
JOG mode is not selected by HMI.
edge change
1 → 0
DB11
DBX5.0
Selected machine function TEACH IN
Edge evaluation: No
Signal state 1 or
The machine function TEACH IN is selected by HMI within BAG.
edge change
0 → 1
Signal state 0 or
The machine function TEACH IN is not selected by HMI.
edge change
1 → 0
Additional references Operating Manual HMI (corresponding to the used software)
DB11
DBX5.1
Selected REPOS machine function
Edge evaluation: No
Signal state 1 or
The machine function REPOS is selected by HMI within BAG.
edge change
0 → 1
Signal state 0 or
The machine function REPOS is not selected by HMI.
edge change
1 → 0
Application exam‐
When a fault occurs when executing a part program (e.g. tool breakage), the axis is manually moved
ple(s)
away from the fault location in the JOG mode in order to be able to replace the tool.
The axis can then be manually returned to the exact previous position using the REPOS machine
function so that the program can be continued in the automatic mode.
Additional references Operating Manual HMI (corresponding to the used software)
DB11
DBX5.2
Selected machine function REF
Edge evaluation: No
Signal state 1 or
The machine function REF is selected by HMI within BAG.
edge change
0 → 1
1606
Signal(s) updated: Cyclically
Signal(s) updated: Cyclically
Signal(s) updated: Cyclically
Signal(s) updated: Cyclically
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Basic Functions

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 828dSinumerik 840de sl

Table of Contents

Save PDF