SR353-10
2. A personal computer running Microsoft
3. Upgrading requires the following items:
1) Communications Cable - P/N 16353-61
2) Communications Cable Adapter; select one to mate with your computer's COM port:
DB25 to MMJ11 - P/N 16353-62
DB9 to MMJ11 - P/N 16353-63
3) Model 352P/353/354 Firmware Upgrade Utility P/N15939-77V3.00 (upgrades 1.xx to 3.00). Kit
contains are:
•
a CD-ROM with the multiple versions of the controller firmware
•
a software license disk created for the station (by serial number) to be upgraded.
•
a software registration card
INSTALLING VERSION 3.00
1. Follow the instructions on the label of the supplied CD-ROM to install the utility.
2. Read the supplied HELP file for information about downloading firmware (kernel and code) to a
controller.
3. Complete and mail the software registration card.
Technical Support
For technical support, contact the Technical Support Group at +1 215 646 7400 ext. 4993. For the address
of the Siemens Energy & Automation, Process Industries Division office nearest you, visit either of the
following Internet sites.
www.sea.siemens.com/ia/
www.procidia.com
Current revisions of User's Manuals for the listed controllers can be found at the above sites. The manuals
are in Portable Document Format (PDF).
Siemens Energy & Automation, Inc assumes no liability for errors or omissions in this document or for the application and use of information
included in this document. The information herein is subject to change without notice.
Procedures in this document have been reviewed for compliance with applicable approval agency requirements and are considered sound
practice. Neither Siemens Energy & Automation, Inc. nor these agencies are responsible for repairs made by the user.
© Copyright 2003, Siemens Energy & Automaton, Inc. All rights reserved.
®
®
Windows
95, 98 or NT is needed.
2