hit counter script

Siemens SIMATIC S7-1200 System Manual page 1565

Hide thumbs Also See for SIMATIC S7-1200:
Table of Contents

Advertisement

Replacing the terminal block connector
It is important to use the correct terminal block for your module. Refer to the tables below
and your module specifications to determine the correct terminal block replacement.
Note
Keyed removable terminal blocks
PLCs always require correct wiring to ensure safety and proper operation.
When replacing the terminal block in your CPU or SM, it is important that you use the correct
terminal block and correct wiring source for your module.
The keyed feature helps prevent you from accidentally placing a high voltage wired terminal
block into a low voltage module, or from placing a special voltage wired terminal block into a
normal voltage module. Some terminal blocks are specifically keyed at left, at right or at
middle.
Removable terminal block
(keyed example shown
Table C- 16
S7-1200 CPU V4.0 and later - Terminal block spare kits
If you have
S7-1200 CPU V4.0 and later (article number)
CPU 1211C DC/DC/DC (6ES7211-1AE40-0XB0)
CPU 1211C DC/DC/Relay (6ES7211-1HE40-0XB0)
CPU 1211C AC/DC/Relay (6ES7211-1BE40-0XB0)
S7-1200 Programmable controller
System Manual, V4.2, 09/2016, A5E02486680-AK
Key on device
C.8 Spare parts and other hardware
Key on device only fits appropriate
removable terminal block
Use this terminal block spare kit (4/pk)
Terminal block
article number
6ES7292-1BC30-0XA0
6ES7292-1AH30-0XA0
6ES7292-1AP30-0XA0
6ES7292-1BC30-0XA0
6ES7292-1AH40-0XA0
6ES7292-1AP30-0XA0
6ES7292-1BC30-0XA0
6ES7292-1AH40-0XA0
6ES7292-1AP40-0XA0
Ordering Information
Terminal block
description
3 pin, gold-plated
8 pin, tin-plated
14 pin, tin-plated
3 pin, gold-plated
8 pin, tin-plated, keyed
14 pin, tin-plated
3 pin, gold-plated
8 pin, tin-plated, keyed
14 pin, tin-plated, keyed
1565

Advertisement

Table of Contents
loading

Table of Contents

Save PDF