Siemens SIMATIC S7-1200 System Manual page 1360

Hide thumbs Also See for SIMATIC S7-1200:

Table of Contents

Technical specifications

A.2 General technical specifications

The CE Declaration of Conformity is held on file available to competent authorities at:

Sector Industry

DF FA AS DH AMB

Postfach 1963

D-92209 Amberg

cULus approval

Underwriters Laboratories Inc. complying with:

● Underwriters Laboratories, Inc.: UL 508 Listed (Industrial Control Equipment)

● Canadian Standards Association: CSA C22.2 Number 142 (Process Control Equipment)

The SIMATIC S7-1200 series meets the CSA standard.

The cULus logo indicates that the S7-1200 has been examined and certified by

Underwriters Laboratories (UL) to standards UL 508 and CSA 22.2 No. 142.

Factory Mutual Research (FM)

Approval Standard Class Number 3600 and 3611

Approved for use in:

Class I, Division 2, Gas Group A, B, C, D, Temperature Class T3C Ta = 60 °C

Class I, Zone 2, IIC, Temperature Class T3 Ta = 60 °C

Canadian Class I, Zone 2 Installation per CEC 18-150

IMPORTANT EXCEPTION: See Technical Specifications for the number of inputs or outputs

allowed on simultaneously. Some models are de-rated for Ta = 60 °C.

Substitution of components can impair the suitability for Class I, Division 2 and Zone 2.

Repair of units should only be performed by an authorized Siemens Service Center.

S7-1200 Programmable controller

System Manual, V4.2, 09/2016, A5E02486680-AK