Siemens SIMATIC S7-1200 System Manual page 1363
Hide thumbs
Also See for SIMATIC S7-1200:
- Function manual (527 pages) ,
- Manual (364 pages) ,
- System manual (338 pages)
Table of Contents
Advertisement
Note
The S7-1200 automation system is intended for use in industrial areas; use in residential
areas can have an impact on radio or TV reception. If you use the S7-1200 in residential
areas, you must ensure that its radio interference emission complies with the limit value
Class B in accordance with EN 55011.
Examples of suitable measures for achieving RF interference, level Class B include:
- Installation of the S7-1200 in a grounded control cabinet
- Use of noise filters in the supply lines
Ensure that the radio interference emission complies with Class B in accordance with EN
55011.
Individual acceptance is required (final installation must meet all safety and EMC
requirements of a residential installation).
Electromagnetic compatibility
Electromagnetic Compatibility (EMC) is the ability of an electrical device to operate as
intended in an electromagnetic environment and to operate without emitting levels of
electromagnetic interference (EMI) that may disturb other electrical devices in the vicinity.
Table A- 2
Electromagnetic compatibility - Immunity per EN 61000-6-2
EN 61000-4-2
Electrostatic discharge
EN 61000-4-3
Radiated, radio-frequency, elec-
tromagnetic field immunity test
EN 61000-4-4
Fast transient bursts
EN 6100-4-5
Surge immunity
EN 61000-4-6
Conducted disturbances
EN 61000-4-11
Voltage dips
S7-1200 Programmable controller
System Manual, V4.2, 09/2016, A5E02486680-AK
Immunity per EN 61000-6-2
8 kV air discharge to all surfaces
6 kV contact discharge to exposed conductive surfaces
80 to 1000 MHz, 10 V/m, 80% AM at 1 kHz
1.4 to 2.0 GHz, 3 V/m, 80% AM at 1 kHz
2.0 to 2.7 GHz, 1 V/m, 80% AM at 1 kHz
2 kV, 5 kHz with coupling network to AC and DC system power
2 kV, 5 kHz with coupling clamp to I/O
AC systems - 2 kV common mode, 1 kV differential mode
DC systems - 2 kV common mode, 1 kV differential mode
For DC systems, refer to Surge immunity below
150 kHz to 80 MHz, 10 V RMS, 80% AM at 1kHz
AC systems
0% for 1 cycle, 40% for 12 cycles and 70% for 30 cycles at 60
Hz
Technical specifications
A.2 General technical specifications
1363
Advertisement
Table of Contents
Related Manuals for Siemens SIMATIC S7-1200
Related Products for Siemens SIMATIC S7-1200
- Siemens SIMATIC PRO Extension Unit 12" Hardwired
- Siemens SIMATIC PRO Extension Unit 12" PROFINET
- Siemens SIMATIC PRO Extension Unit 12" PROFIsafe
- Siemens SIMATIC PRO Extension Unit 12" PN Advanced
- Siemens SIMATIC PRO Extension Unit 12" F PN Advanced
- Siemens SIMATIC NET SCALANCE W760 Series
- Siemens SIMATIC NET SCALANCE W720 Series
- Siemens SIMATIC 500 Series