Table of Contents
Advertisement
The Time Service main display shows the date and time (also known as the system time). The
abbreviation (DST) means daylight saving time and is only shown if the current time is in daylight
saving time.
The Network Time Protocol (NTP) is a standard for clock synchronization in computer systems. The
NTP overview
link is only displayed if NTP synchronization has been enabled in this device.
Information about activating this function see chapter
enSuite.
Furthermore, the following is also displayed:
Time zone:
Latest update:
Latest deviation:
Ext. source:
For a user who is not logged in or a user
who is logged in but is not entitled to
change the device time,
"Time Service – Time Synchronization"
will open as the second display after
"Date & Time" has been activated.
Figure 7.28: Time Service – Time
Synchronization display
The display shows following information:
Time synchronization by: Enter the seconds in the box by which the system time is to be changed.
The entry depends on the limits defined in the
Next possible synchronization: Next possible time for another synchronization. The calculation is
made after a synchronization based on the synchronization interval parameter which is also set in
enSuite.
Expected new time: The time service continuously calculates the new system time in this line.
Synchronize
now: This action (if available) specifically saves the new time as the system time.
Information for general use
Rev. M / 73023639
GASLAB Q2 DISPLAYS (OPERATE THE DEVICE)
Geographical location
Time stamp of the last time change.
Deviation (in seconds) at the last time change
Number of the external source for the last time synchronization
8 Configuration and analysis software
Configuration and analysis software
113
enSuite.
GasLab Q2
Advertisement
Table of Contents
