Table of Contents
Advertisement
See also the following table:
Identification
<Black text>
<Yellow text>
<Red text>
Whenever changes occur or an event is included in or removed from the Error List main display,
this information is recorded in the logbook.
the
The data can then be viewed in a table and, possibly, in the form of a diagram.
Step
Action: Viewing the logbook error list on remote operation panel
1.
Navigate via
2.
The archive takes the form of a ring memory with 1000 data records. When the memory is full, the
newest data record overwrites the oldest one. The archive content remains available in the event of
a power failure or software update.
The header contains a time stamp with the precise calendar time at which the entry was generated
and a serial (sequence) number. The main body contains the text with information as to why the
entry was created and starts with the name of the software part which caused the entry.
Information for general use
Rev. M / 73023639
GASLAB Q2 DISPLAYS (OPERATE THE DEVICE)
To analyze large archive sections, it is more practical
to read the archives from the device using
Configuration and analysis software enSuite
to
Meaning
Event begins
Event ends
Event of type Information
Event of type Warning
Event of type Alarm
and click on the symbol
The entries are displayed in the same
way as in the error list in the main
display, see section
Main display (accepting / quit error
messages).
121
and save them to a PC.
7.3.8 Error List –
GasLab Q2
Advertisement
Table of Contents
