Cisco Catalyst 3560-X Command Reference Manual page 123

Hide thumbs Also See for Catalyst 3560-X:

Table of Contents

Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

Related Commands

Downloaded from

www.Manualslib.com

If you enter the match-all or match-any keyword, you can only use it to specify an extended named

access control list (ACL) with the match access-group acl-index-or-name class-map configuration

To define packet classification on a physical-port basis, only one match command per class map is

supported. In this situation, the match-all and match-any keywords are equivalent.

Only one ACL can be configured in a class map. The ACL can have multiple access control entries

This example shows how to configure the class map called class1 with one match criterion, which is an

access list called 103:

Switch(config)# access-list 103 permit ip any any dscp 10

Switch(config)# class-map class1

Switch(config-cmap)# match access-group 103

Switch(config-cmap)# exit

This example shows how to delete the class map

Switch(config)# no class-map class1

You can verify your settings by entering the show class-map privileged EXEC command.

match (class-map

configuration)

show class-map

manuals search engine

Defines a traffic classification match criteria (through the police,

set, and trust policy-map class configuration commands) for the

specified class-map name.

Defines the match criteria to classify traffic.

Creates or modifies a policy map that can be attached to multiple

ports to specify a service policy.

Displays QoS class maps.

Catalyst 3750-X and 3560-X Switch Command Reference

Catalyst 3750-x