Chapter 2
Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
ip snap forwarding
Note
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Examples
Related Commands
OL-21522-02
Downloaded from
www.Manualslib.com
Use the ip snap forwarding global configuration comm
enable forwarding of IP Version 4 (IPv4) and IP V
(SNAP) encapsulation. Use no form of this command to disable forwarding of these frames.
ip snap forwarding
no ip snap forwarding
This command is not supported on switches running the LAN base feature set.
This command has no arguments or keywords.
The switch does not forward IPv4 and IPv6 frames with SNAP encapsulation.
Global configuration
Release
12.2(53)SE2
Use the ip snap forwarding global configuration command to enable forwarding of IPv4 and IPv6
frames with SNAP encapsulation.
If a switch that is joining the stack does not support forwarding of IPv4 and IPv6 frames with SNAP
encapsulation, all the switches in the stack do not forward the IPv4 and IPv6 frames, and this forwarding
feature is disabled.
This example shows how to enable forwarding of IPv4 and IPv6 frames with SNAP encapsulation:
Switch(config)# ip snap forwarding
You can verify your settings by entering the show running-config privileged EXEC command.
Command
show running-config
manuals search engine
and on the switch stack or on a standalone switch to
ersion 6 (IPv6) frames with Subnetwork Access Protocol
Modification
This command was introduced.
Description
Displays the operating configuration. For syntax information, use this
link to the Cisco IOS Release 12.2 Command Reference listing page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_comm
and_reference_list.html
Select the Cisco IOS Commands Master List, Release 12.2 to navigate
to the command.
Catalyst 3750-X and 3560-X Switch Command Reference
ip snap forwarding
2-277