Table of Contents
Advertisement
9.3
Program Examples
This section describes the following program examples.
Mode
Temperature input mode
This is a program example where this module is used as a temperature input module.
This is a program example for operations such as the auto tuning, self-tuning, and error
code read.
Temperature
Standard
control mode
Control
This is a program example where the peak current suppression function and the
simultaneous temperature rise function are used for the control.
For the settings using the engineering tool, the procedure is described based on the use of GX Works2.
9.3.1
When the module is used as a temperature input module
(1) System configuration
Master station
(station No.0)
Overview of the program example
Power supply module (Q62P)
CPU module (Q10UDHCPU)
Master/local module (QJ71GF11-T2)
Input module (QX10)
Temperature control module
(NZ2GF2B-60TCTT4)
Remote device station
(station No.1)
CHAPTER 9 PROGRAMMING
Reference
Page 235, Section 9.3.1
Page 244, Section 9.3.2
Page 254, Section 9.3.3
CH1
Type-K thermocouple
-200°C to 1300°C
CH3
Type-K thermocouple
-200°C to 1300°C
235
9
Advertisement
Table of Contents
Troubleshooting
