hit counter script

Mitsubishi Electric NZ2GF2B-60TCTT4 User Manual page 304

Cc-link ie field network temperature control module
Table of Contents

Advertisement

(4) CH1 to CH4 AT simultaneous temperature rise parameter calculation flag
(RWr3)
Standard
The status when simultaneous temperature rise AT (auto tuning) calculates simultaneous temperature rise
parameter is stored in this area.
• 0: OFF
• 1: ON
Bit
Flag name
CH1 AT simultaneous temperature rise
b0
parameter calculation completion
CH1 AT simultaneous temperature rise
b1
parameter calculation error status
CH1 Simultaneous temperature rise AT
b2
disable status
b3
 (fixed to 0)
CH2 AT simultaneous temperature rise
b4
parameter calculation completion
CH2 AT simultaneous temperature rise
b5
parameter calculation error status
CH2 Simultaneous temperature rise AT
b6
disable status
 (fixed to 0)
b7
CH3 AT simultaneous temperature rise
b8
parameter calculation completion
CH3 AT simultaneous temperature rise
b9
parameter calculation error status
CH3 Simultaneous temperature rise AT
b10
disable status
 (fixed to 0)
b11
CH4 AT simultaneous temperature rise
b12
parameter calculation completion
CH4 AT simultaneous temperature rise
b13
parameter calculation error status
CH4 Simultaneous temperature rise AT
b14
disable status
 (fixed to 0)
b15
*1
The parameter indicates the values in CH Simultaneous temperature rise gradient data (address: 2D1H, 2D5H, 2D9H,
2DDH) and CH Simultaneous temperature rise dead time (address: 2D2H, 2D6H, 2DAH, 2DEH).
This area is enabled only for the following channels.
• CH1 to CH4 when the standard control is used
• CH3 and CH4 when mix control (normal mode) or mix control (expanded mode) is used
For details on the simultaneous temperature rise function, refer to the following.
Page 198, Section 8.3.17
302
b15 b14 b13 b12 b11 b10 b9
CH4
CH3
This flag turns to 1 (ON) when the simultaneous temperature rise parameter
calculated by simultaneous temperature rise AT.
This flag turns to 1 (ON) when the simultaneous temperature rise parameter
calculated by simultaneous temperature rise AT.
This flag turns to 1 (ON) when the simultaneous temperature rise AT was not able to be
executed.
 (Unused)
Same description as CH1
 (Unused)
Same description as CH1
 (Unused)
Same description as CH1
 (Unused)
b8
b7
b6
b5
b4
b3
b2
CH2
Description
b1
b0
CH1
*1
has been
*1
has not been

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nz2gf2b-60tcrt4

Table of Contents