Table of Contents
Advertisement
(14)CH Sensor two-point correction offset latch completion flag (RX28, RX2A,
RX2C, RX2E)
Common
When a sensor two-point correction offset value is stored in a remote buffer memory area, this signal turns to
Latch completed (ON).
When CH Sensor two-point correction offset latch request (RY28, RY2A, RY2C, RY2E) is turned to No request
(OFF), the signal turns to No request (OFF). (Page 300, Appendix 1.2 (9))
For details on the sensor two-point correction function, refer to the following.
Page 133, Section 8.1.5 (2)
(15)CH Sensor two-point correction gain latch completion flag (RX29, RX2B,
RX2D, RX2F)
Common
When a sensor two-point correction gain value is stored in a remote buffer memory area, this signal turns to
Latch completed (ON).
When CH Sensor two-point correction gain latch request (RY29, RY2B, RY2D, RY2F) is turned to No request
(OFF), the signal turns to No request (OFF). (Page 300, Appendix 1.2 (10))
For details on the sensor two-point correction function, refer to the following.
Page 133, Section 8.1.5 (2)
(16)CH Transistor output flag (RX30, RX32, RX34, RX36)
transistor output flag (RX30, RX32, RX34, RX36)
flag (RX31, RX33, RX35, RX37)
RX33, RX35, RX37)
RX3C, RX3E)
Heating-cooling
RX3F)
Heating-cooling
ON/OFF status of transistor output and ON delay output are stored in these signals. In the heating-cooling
control, ON/OFF status of transistor output/ON delay output for heating are stored in RX38 to RX3F.
, CH Heating ON delay output flag (RX31,
Standard
, CH Cooling transistor output flag (RX38, RX3A,
Heating-cooling
, CH Cooling ON delay output flag (RX39, RX3B, RX3D,
, CH Heating
Standard
, CH ON delay output
Heating-cooling
APPENDICES
A
293
Advertisement
Table of Contents
Troubleshooting
