Aaa Authentication Login Password-Aging Enable - Cisco MDS 9000 series Command Reference Manual
Hide thumbs
Also See for MDS 9000 series:
- Configuration manual (344 pages) ,
- Troubleshooting manual (161 pages) ,
- Hardware installation manual (60 pages)
Table of Contents
Advertisement
aaa authentication login password-aging enable
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
aaa authentication login password-aging enable
To configure password aging notifcation from AAA server , use the aaa authentication login
password-aging enable in configuration mode. To revert to factory defaults, use the no form of the
command.
Syntax Description
This command has no other arguments or keywords.
Defaults
None.
Command Modes
Configuration mode.
Command History
Release
3.2(1)
Usage Guidelines
Specify the currently configured command preceded by a no in order to revert to the factory defaults.
This command is supported by the TACACS+ protocol. If you try to use the RADIUS protocol by
Note
enabling this feature, RADIUS will generate a SYSLOG message and authentication will fall back to
local.
Examples
The following example enables password aging notification from AAA server.
switch# config terminal
switch(config)# aaa authentication login password-aging enable
The following example reverts to the Password Authentication Password (PAP) authentication method
(default)
switch(config)# no aaa authentication login password-aging enable
Related Commands
Command
show aaa
authentication login
password-aging
Cisco MDS 9000 Family Command Reference
2-8
aaa authentication login password-aging enable
no aaa authentication login password-aging enable
Modification
This command was introduced.
Description
Displays the status of the password aging notification (enabled/disabled).
Chapter 2
A Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Advertisement
Table of Contents
