Autonomous-Fabric-Id Database - Cisco MDS 9000 series Command Reference Manual

Hide thumbs Also See for MDS 9000 series:

Table of Contents

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

autonomous-fabric-id database

To configure an autonomous fabric ID (AFID) database, use the autonomous-fabric-id database

command. To remove the fabric AFID database, use the no form of the command.

Syntax Description

This command has no arguments or keywords.

Command Modes

Configuration mode.

Command History

Usage Guidelines

You must configure the IVR VSAN topology to auto mode, using the ivr vsan-topology auto command,

before you can use the autonomous-fabric-id database command to modify the database. The

autonomous-fabric-id database command also enters AFID database configuration submode.

In user-configured VSAN topology mode, the AFIDs are specified in the IVR VSAN topology

configuration itself and a separate AFID configuration is not needed.

The following example shows how to create an AFID database and enters AFID database configuration

switch# config terminal

Enter configuration commands, one per line.

switch(config)# autonomous-fabric-id database

switch(config-afid-db)#

Related Commands

ivr vsan-topology auto

show autonomous-fabric-id database

OL-8413-07, Cisco MDS SAN-OS Release 3.x

autonomous-fabric-id database

no autonomous-fabric-id database

Modification

This command was introduced.

End with CNTL/Z.

Configures a VSAN topology for Inter-VSAN Routing

(IVR) to auto configuration mode.

Configures a switch WWN in the autonomous fabric ID

(AFID) database

Displays the contents of the AFID database.

Displays IVR feature information.

Cisco MDS 9000 Family Command Reference

autonomous-fabric-id database