Clear Sdv - Cisco MDS 9000 series Command Reference Manual
Hide thumbs
Also See for MDS 9000 series:
- Configuration manual (344 pages) ,
- Troubleshooting manual (161 pages) ,
- Hardware installation manual (60 pages)
Table of Contents
Advertisement
Chapter 4
C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
clear sdv
To clear specified SAN device virtualization parameters, use the clear sdv command in EXEC mode.
Syntax Description
database
vsan vsan-id
session
statistics
Defaults
None.
Command Modes
EXEC mode.
Command History
Release
3.1(2)
Usage Guidelines
None.
Examples
The following example shows how to clear SDV statistics.
switch# clear sdv statistics vsan 2
Related Commands
Command
sdv enable
show sdv statistics
OL-8413-07, Cisco MDS SAN-OS Release 3.x
clear sdv {database vsan vsan-id | session vsan vsan-id | statistics vsan vsan-id}
Clears the SDV database.
Specifies the number of the VSAN. The range is 1 to 4093.
Clears the SDV session.
Clears the SDV statistics.
Modification
This command was introduced.
Description
Enables or disables SAN device virtualization.
Displays SAN device virtualization statistics.
Cisco MDS 9000 Family Command Reference
clear sdv
4-77
Advertisement
Table of Contents
