Debug Fspf - Cisco MDS 9000 series Command Reference Manual
Hide thumbs
Also See for MDS 9000 series:
- Configuration manual (344 pages) ,
- Troubleshooting manual (161 pages) ,
- Hardware installation manual (60 pages)
Table of Contents
Advertisement
debug fspf
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug fspf
To enable debugging for the FSPF feature, use the debug fspf command in EXEC mode. To disable a
debug command, use the no form of the command or use the no debug all command to turn off all
debugging.
Syntax Description
all
database
error
events
fc
fc-tunnel
fcip
fv
gigbitethernet slot/port
ipc
mgmt 0
port-channel
sup-fc
pkt
both
Cisco MDS 9000 Family Command Reference
6-56
debug fspf {all [interface type number] [vsan vsan-id] |
database [interface type number] [vsan vsan-id |
error |
event [interface type number] [vsan vsan-id] |
fc {pkt | pkthdr} {both | tx | rx} [interface type number] [vsan vsan-id] |
flood [interface type number] [vsan vsan-id] |
ha [interface type number] [vsan vsan-id] |
mts {pkt {both | rx [node range | opcode range | sap range] | tx} | pkthdr {both | rx [numpkt
range] | tx}} |
retrans [interface type number] [vsan vsan-id] |
route |
timer}
no debug fspf {all [interface type number] [vsan vsan-id] |
database [interface type number] [vsan vsan-id |
error |
event [interface type number] [vsan vsan-id] |
fc {pkt | pkthdr} {both | tx | rx} [interface type number] [vsan vsan-id] |
flood [interface type number] [vsan vsan-id] |
ha [interface type number] [vsan vsan-id] |
mts {pkt {both | rx [node range | opcode range | sap range] | tx} | pkthdr {both | rx [numpkt
range] | tx}} |
retrans [interface type number] [vsan vsan-id] |
route |
timer}
Enables debugging for all FSPF features.
Enables debugging for the FSPF database.
Enables debugging for FSPF error conditions.
Enables debugging for FSPF events.
Enables debugging of Fibre Channel packets and headers.
Enables debugging of Fibre Channel tunnel interface.
Enables debugging of Fibre Channel IP packets and headers.
Enables debugging of Fibre Channel Virtualization interface.
Specifies the Gigabit Ethernet interface slot and port.
Enables debugging of IPC packets and headers.
Specifies the management interface.
Enables debugging of PortChannel packets and headers.
Enables debugging of inband Interface.
Enables debugging for FCC tx/rx FCC packets.
Specifies debugging in both the transmit and receive directions.
Chapter 6
Debug Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Advertisement
Table of Contents
