Show Ethernet Service Interface - Cisco ME 3400 Command Reference Manual

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

show ethernet service interface

Use the show ethernet service interface privileged EXEC command to display interface-based

information about Ethernet customer-service instances for all interfaces or a specified interface.

This command is available only if your switch is running the metro IP access or metro access image.

Syntax Description

interface-id

Command Modes

Privileged EXEC

Command History

Usage Guidelines

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output

are not displayed, but the lines that contain Output are displayed.

These are examples of outputs from the show ethernet service interface commands:

Switch# show ethernet service interface gigabitethernet0/1

GigabitEthernet0/1 PE2-G101

Switch# show ethernet service interface detail

Interface: FastEthernet0/1

EVC Map Type: Bundling-Multiplexing

Interface: FastEthernet0/2

EVC Map Type: Bundling-Multiplexing

Interface: FastEthernet0/3

EVC Map Type: Bundling-Multiplexing

Cisco ME 3400 Ethernet Access Switch Command Reference

show ethernet service interface [interface-id] [detail] [ | {begin | exclude | include} expression]

(Optional) Display service-instance information for the specified interface.

(Optional) Display detailed information about service instances on all

interfaces or the specified interface.

(Optional) Display begins with the line that matches the expression.

(Optional) Display excludes lines that match the expression.

(Optional) Display includes lines that match the specified expression.

Expression in the output to use as a reference point.

Modification

This command was introduced.

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands