Cisco ME 3400 Command Reference Manual page 633

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

notification-type

Though visible in the command-line help strings, the fru-ctrl, and vtp keywords are not supported.

(Optional) Type of notification to be sent to the host. If no type is specified,

all notifications are sent. The notification type can be one or more of the

these keywords:

The bgp, hsrp, ipmulticast, mdsp, ospf, and pim keywords are

available only when the metro IP access image is installed on the

bgp—Send Border Gateway Protocol (BGP) state change traps. This

keyword is valid only when the metro IP access image is installed on the

bridge—Send SNMP Spanning Tree Protocol (STP) bridge MIB traps.

config—Send SNMP configuration traps.

copy-config—Send SNMP copy configuration traps.

cpu threshold—Allow CPU-related traps.

entity— Send SNMP entity traps.

envmon—Send environmental monitor traps.

flash—Send SNMP FLASH notifications.

hsrp—Send SNMP Hot Standby Router Protocol (HSRP) traps.

ipmulticast—Send SNMP IP multicast routing traps.

mac-notification—Send SNMP MAC notification traps.

msdp—Send SNMP Multicast Source Discovery Protocol (MSDP)

ospf—Send Open Shortest Path First (OSPF) traps.

pim—Send SNMP Protocol-Independent Multicast (PIM) traps.

port-security—Send SNMP port-security traps.

rtr—Send SNMP Response Time Reporter traps.

snmp—Send SNMP-type traps.

storm-control—Send SNMP storm-control traps.

stpx—Send SNMP STP extended MIB traps.

syslog—Send SNMP syslog traps.

tty—Send TCP connection traps.

vlan-membership— Send SNMP VLAN membership traps.

vlancreate—Send SNMP VLAN-created traps.

vlandelete—Send SNMP VLAN-deleted traps.

Cisco ME 3400 Ethernet Access Switch Command Reference

snmp-server host