Switchport Private-Vlan - Cisco ME 3400 Command Reference Manual
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (872 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
switchport private-vlan
Use the switchport private-vlan interface configuration command to define a private-VLAN
association for an isolated or community port or a mapping for a promiscuous port. Use the no form of
this command to remove the private-VLAN association or mapping from the port.
The mapping commands are supported only on network node interfaces (NNIs).
Note
Syntax Description
association
host
primary-vlan-id
secondary-vlan-id
mapping
add
remove
secondary-vlan-list
host-association
Defaults
The default is to have no private-VLAN association or mapping configured.
Command Modes
Interface configuration
Command History
Release
12.2(25)EX
Usage Guidelines
Private-VLAN association or mapping has no effect on the port unless the port has been configured as a
private-VLAN host or promiscuous port by using the switchport mode private-vlan {host |
promiscuous} interface configuration command.
OL-9640-10
switchport private-vlan {association {host primary-vlan-id secondary-vlan-id | mapping
primary-vlan-id {add | remove} secondary-vlan-list} | host-association primary-vlan-id
secondary-vlan-id | mapping primary-vlan-id {add | remove} secondary-vlan-list}
no switchport private-vlan {association {host | mapping} | host-association | mapping
Define a private-VLAN association for a port.
Define a private-VLAN association for a community or isolated host port.
The VLAN ID of the private-VLAN primary VLAN. The range is from 2 to
1001 and 1006 to 4094.
The VLAN ID of the private-VLAN secondary (isolated or community) VLAN.
The range is from 2 to 1001 and 1006 to 4094.
Define private-VLAN mapping for a promiscuous port. Only NNIs can be
configured as promiscuous ports. This keyword is not supported on user
network interfaces (UNIs) or enhanced network interfaces (ENIs).
Associate secondary VLANs to the primary VLAN.
Clear the association between secondary VLANs and the primary VLAN.
One or more secondary (isolated or community) VLANs to be mapped to the
primary VLAN.
Define a private-VLAN association for a community or isolated host port.
Modification
This command was introduced.
Cisco ME 3400 Ethernet Access Switch Command Reference
switchport private-vlan
2-687
Advertisement
Table of Contents
