Table of Contents
Advertisement
MITSUBISHI CNC
10 Setting the Deceleration Check
10.4 Parameter
(1) Designating deceleration check
Base specification parameter
#
Item
The definitions are changed with the setting of "#1306 InpsTyp
1193
inpos
Deceleration check specification type".
When
Deceleration
check method 1 is
selected
When
Deceleration
check method 2 is
selected
Deceleration
1223
aux07/bit1
check method 2
Deceleration
1306
InpsTyp
check
specification type
(2) Deceleration check during opposite direction travel
Base specification parameter
#
Item
G1 -> G0
1502
G0Ipfg
deceleration
check
G1 -> G1
1503
G1Ipfg
deceleration
check
114
Details
Select the deceleration check method for G0.
0: Command deceleration check
1: In-position check
Select the deceleration confirmation method for the
positioning or cutting command.
0: G0, G1+G9 Command deceleration check
1: G0, G1+G9 In-position check
Select the deceleration check method in G1+G9.
0: Command deceleration check in G1+G9
1: In-position check in G1+G9
The deceleration check is not performed for the
commands except G1+G9.
When "#1306 InpsTyp deceleration check
specification type" is set to "1" (Deceleration check
specification type 2), this parameter will be invalid.
Select the parameter specification type for the G0 or
G1 deceleration check.
0: Deceleration check specification type 1
G0 is specified with "#1193 inpos",
and G1+G9 with "#1223 aux07/bit1".
1: Deceleration check specification type 2
G0 or G1+G9 is specified with "#1193 inpos".
Details
Select whether to perform a deceleration check when the
travel direction is changed from G1 to G0.
0: Not perform
1: Perform
Select whether to perform a deceleration check when the
travel direction is changed from G1 to G1.
0: Not perform
1: Perform
Setting range
0 / 1
0 / 1
0 / 1
0 / 1
Setting range
0 / 1
0 / 1
- Quick Links:
- Device Configuration
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
