Table of Contents
Advertisement
MITSUBISHI CNC
Appendix 1 Explanation of Parameters
Appendix 1.5 Spindle Parameters
The parameters with "(PR)" requires the CNC to be turned OFF after the settings. Turn the power OFF and ON to enable
the parameter settings.
【#3001】 slimt 1 Limit rotation speed (Gear: 00)
Set the spindle speed for maximum motor speed with gear 00.
(Set the spindle speed for the S analog output 10V.)
---Setting range---
0 to 99999 (r/min)
【#3002】 slimt 2 Limit rotation speed (Gear: 01)
Set the spindle speed for maximum motor speed with gear 01.
(Set the spindle speed for the S analog output 10V.)
---Setting range---
0 to 99999 (r/min)
【#3003】 slimt 3 Limit rotation speed (Gear: 10)
Set the spindle speed for maximum motor speed with gear 10.
(Set the spindle speed for the S analog output 10V.)
---Setting range---
0 to 99999 (r/min)
【#3004】 slimt 4 Limit rotation speed (Gear: 11)
Set the spindle speed for maximum motor speed with gear 11.
(Set the spindle speed for the S analog output 10V.)
---Setting range---
0 to 99999 (r/min)
【#3005】 smax 1 Maximum rotation speed (Gear: 00)
Set the maximum spindle speed with gear 00.
Set this as slimt >= smax.
By comparing the S command value and the values of gear 1 - 4, a spindle gear shift command will
be output automatically.
---Setting range---
0 to 99999 (r/min)
【#3006】 smax 2 Maximum rotation speed (Gear: 01)
Set the maximum spindle speed with gear 01.
Set this as slimt >= smax.
By comparing the S command value and the values of gear 1 - 4, a spindle gear shift command will
be output automatically.
---Setting range---
0 to 99999 (r/min)
【#3007】 smax 3 Maximum rotation speed (Gear: 10)
Set the maximum spindle speed with gear 10.
Set this as slimt >= smax.
By comparing the S command value and the values of gear 1 - 4, a spindle gear shift command will
be output automatically.
---Setting range---
0 to 99999 (r/min)
352
- Quick Links:
- Device Configuration
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
